· Platform Guides · 8 min read
Clash Apps for iPhone: Find Them on the App Store and Import a Subscription
Learn how to get an iPhone app that supports Clash configs, import a subscription URL, approve its VPN configuration, and verify your first connection.
Get a Clash-Compatible App from the App Store
On your iPhone, look for an app that can read your subscription format rather than searching for “Clash” by name alone. For example, you can open the App Store listing for Clash Plus from the iOS section of the downloads page. Before installing, check the app name, developer, and minimum iOS version under Compatibility. Then tap Get, the displayed price, or the redownload icon, as shown on the listing. To check your iOS version, go to Settings → General → About.
If the App Store Listing Isn’t Available, Check Your Region and iOS Version
- “Not available in your country or region” appears: Check the country or region associated with your Apple Account for the App Store. Go to Settings → Apple Account (your name at the top) → Media & Purchases → View Account → Country/Region. Your device language and current network location do not determine your account’s region.
- The listing says you need a newer version of iOS: Compare the requirement with the version shown under About. If your device can’t update to the required version, choose an app that supports both your current iOS version and your subscription format.
- Search results show several apps with the same name: Return to a trusted listing and verify the developer. Check the app description for explicit support for importing Clash YAML from a URL. If your subscription uses mihomo extensions, also check that the app version supports the relevant fields and protocols. “Clash-compatible” does not mean every extension is supported.
Copy Your Clash Subscription URL and Import the Config
In your subscription provider’s dashboard, select the “Clash” format or the “Clash Meta / mihomo” format specified for your client, then copy the full HTTPS URL. A login page URL, a single-node share link, and a subscription URL are different things. Being able to import a single node does not mean the app can use the same method to fetch a remote YAML config.
- Find the URL import option. Open the app’s Config or Subscription page, add a config, and choose the option to import from a URL. Menu names vary by app version. Look for a field that accepts a remote config URL—not an option to scan a QR code, import a local file, or add a node manually.
- Paste the full URL and save. Make sure it has no spaces or line breaks before or after it. If the URL contains
?and query parameters, keep them intact. Don’t paste the provider’s name, plan details, or copy instructions along with it. - Wait for the download and parsing to finish. Open the config details and check whether nodes or proxy groups appear. If the config uses
proxy-providers, check the provider’s loading status too. A successful download of the main config doesn’t mean the nodes in its providers are ready to use. - Activate the config you just imported. If you have multiple configs, make sure the newly imported one is selected. After making changes, reopen the proxy groups and check the list so you don’t end up testing an older subscription.
Saved but No Nodes? Check the Download Result First
| What you see | What to check first |
|---|---|
401 or 403 | The server requires authentication or has rejected the request. Copy the subscription URL again from your account dashboard and check that it hasn’t been reset and your access is still valid. The status code alone doesn’t tell you whether your plan has expired. |
200 but YAML parsing fails | A successful response doesn’t guarantee you received a config. Check that you selected the right format, and make sure the request wasn’t redirected to a login page that returned HTML. |
| An unsupported field or node type is reported | Note the app version and the field named in the error, then check the core’s compatibility range. If your provider offers a compatible format, create a separate config to compare results and keep the original so you can revert. |
| Proxy groups appear, but their nodes are missing | Check for download or parsing errors for the relevant proxy-providers. Don’t assume the nodes are broken just because refreshing the main config didn’t help. |
First Launch: Allow the iOS VPN Configuration
Once the config is imported, return to the app’s connection screen and enable the proxy. When the tunnel starts for the first time, iOS will usually ask to add a VPN configuration. Check that the prompt names the app you just opened, tap Allow, and authenticate as requested. Importing a subscription and allowing a VPN configuration are separate steps: the first provides nodes and rules; the second lets the app create a system tunnel.
- Already tapped “Don’t Allow”? Try connecting again in the same app and see if the system prompt reappears. If it doesn’t, check the app’s error message, then go to Settings → General → VPN & Device Management → VPN to see whether the app’s configuration is already listed. Menu names may vary by iOS version.
- More than one VPN is configured: On a personal device, disconnect any other active VPN and test again with the current app. If your employer or school manages the device, requires a specific VPN, or restricts changes, contact its IT administrator. Don’t remove a managed profile.
- The VPN is approved, but the connection drops: Check the first startup error in the app’s logs. An incompatible config field and a tunnel startup failure can both leave the app disconnected; repeatedly toggling the connection won’t tell you which one occurred.
iOS apps typically use the system Network Extension to create a tunnel. This VPN configuration is not the same as the Windows system proxy setting, and it doesn’t mean you should copy desktop TUN or service-mode instructions. A connected VPN status only confirms that the tunnel is up; it doesn’t prove that a proxy node works or that a particular request used the proxy as expected.
After Connecting: Check the Node, Rules, and Actual Traffic Route
- Start by testing a specific node. If the app has a Rule mode, select it first. Then manually choose a node in the proxy group used by the rule you’re testing. Run the app’s latency test and note the result. A successful test only shows that the node responded to that particular probe at that time; it doesn’t guarantee access to every site.
- Then check how an actual request matches the rules. In Safari, open a site that normally works and check the app’s connection history or logs. If available, compare the requested domain, matched rule, proxy group, and actual route. If the log shows
DIRECT, the page loading only proves that a direct connection worked—not that the selected proxy node is usable. - Change one thing at a time. On the same network, switch to another node and test the same address. If that still fails, keep the node selected and switch from Wi-Fi to cellular data. When testing over cellular, check Settings → Cellular to make sure both the app and the browser you’re using have data access.
Troubleshoot All Nodes Timing Out Differently from One Site Failing
If every node times out, disconnect the VPN first and confirm that your current network can open sites that normally work without a proxy. On public Wi-Fi, complete any captive portal login. Then check whether the subscription can update. If the logs show a DNS error, identify whether it’s the subscription domain, a node’s server name, or the destination site that failed to resolve; each happens at a different stage. If you see a certificate not yet valid or expired warning, also check Settings → General → Date & Time → Set Automatically. Don’t bypass certificate checks.
If only one node fails, keep the network and test destination the same and compare with another node. If the same node can reach other sites but certain domains fail, check the matched rule and DNS logs first. Review rules in the active config to see whether an earlier rule matched the domain or whether it fell through to the final MATCH. Before making changes, consult the config file reference to verify rule order and proxy group names.
Refresh Subscriptions and Recheck After Switching Devices
After updating a subscription, check which config is active, the key proxy groups, and the currently selected node. Your provider may remove nodes or rename groups, and the app may switch to another node in a group if the selected one disappears. If the app supports local overrides, check the effective config after refreshing. Changes made directly to a remote config copy may be overwritten on the next update.
After switching devices or reinstalling the app, get a valid subscription URL from your account dashboard and approve the VPN configuration on the new device if prompted. Verify these four things separately: the config updated successfully, a node is selected in the proxy group, the system tunnel is connected, and actual requests use the expected route. Checking each one makes it easier to pinpoint a problem than relying on the VPN icon in the status bar.